Tutorail 20 - CleO Bridging

<< Click to Display Table of Contents >>

Navigation:  Tutorials >

Tutorail 20 - CleO Bridging

To extend the capabilities of Arduino hardware interface, CleO50 offers bridge commands for the following standard peripheral interfaces -

 

Interface

Description

GPIO

General-Purpose Input/Output

PWM

Pulse Width Modulation

ADC

Analog-to-Digital Converter

UART

Universal Asynchronous Receiver/Transmitter

I2C

Inter-Integrated Circuit

SPI

Serial Peripheral Interface

 

CleO50 bridging is through Mikroe bus interfaces (MikroE Click 1 and Click 2). In this tutorial, we will see how the various hardware interfaces are supported through the bridging commands.

 

 

Bridging GPIO

This tutorial shows how to use bridging library calls to access GPIO interface on CleO50.

 

 

Bridging PWM

This tutorial shows how to use bridging library calls to access PWM interface

 

 

Bridging ADC

This tutorial shows how to use bridging commands to access ADC interface on CleO50.

 

 

Bridging UART

This tutorial shows how to use bridging library calls to access UART device interface.

 

 

Bridging I2C

This tutorial shows how to use bridging library calls to access I2C device interface on CleO50.

 

 

Bridging SPI

This tutorial shows how to use bridging library calls to access SPI device interface.