Tutorial 20 - CleO Bridging

<< Click to Display Table of Contents >>

Navigation:  Tutorials >

Tutorial 20 - CleO Bridging

To extend the capabilities of Arduino hardware interface, CleO35 offers bridge commands for the following standard peripheral interfaces -

 

Interface

Description

GPIO

General-Purpose Input/Output

PWM

Pulse Width Modulation

ADC

Analog-to-Digital Converter

UART

Universal Asynchronous Receiver/Transmitter

I2C

Inter-Integrated Circuit

SPI

Serial Peripheral Interface

 

CleO35 bridging is through flexi-cable connector. In this tutorial, we will see how the various hardware interfaces are supported through the bridging commands.

 

 

Bridging GPIO

This tutorial shows how to use bridging commands to access GPIO interface on CleO35.

 

 

Bridging PWM

This tutorial shows how to use bridging commands to access PWM interface.

 

 

Bridging UART

This tutorial shows how to use bridging commands to access UART device interface.

 

 

Bridging I2C

This tutorial shows how to use bridging commands to access I2C device interface on CleO35.

 

 

Bridging SPI

This tutorial shows how to use bridging commands to access SPI device interface.