a. RecorderPreview()

<< Click to Display Table of Contents >>

Navigation:  Tutorials > Tutorial 16 - CleO Camera >

a. RecorderPreview()

This section shows how to use the RecorderPreview() command to enable the camera on the board.

 

 

Code

 

 

void setup() {

 Serial.begin(115200);

 CleO.begin();

/* Display Camera Recorder*/

 CleO.RecorderPreview();

}

 

void loop() {}

 

 

Description

 

The above setup routine shows how to  setup the UART communication for status messages and start the recorder application.

 

 

Output

 

Here is the output displayed upon executing the above code snippet -